Garmin 210 - Manual (Page 41)

When the review mode is in use, the cursor may be used to highlight indi­
vidual route legs. When a route leg is highlighted, the ‘active from’ and active
to’ waypoints will be displayed at the bottom of the data window, with the
desired track (DTK) and distance (DIS) for the leg indicated below. The rest of
the map review functions are performed through the map review softkeys at
the bottom of the screen.
To activate or invert the on-screen route:
1. Press the ACTIVTE softkey.
2. To invert (activate in reverse order) the route, press the INVERT softkey.
Once a route has been activated or inverted, the destination field in the data
window will display navigation information to the next ‘active to waypoint’.
As you complete navigation of each route leg, this information will be updated
to reflect the next ‘active to’ waypoint in the route. When you reach the final
destination waypoint in the active route, you’ll need to cancel the active route
to stop navigation to the last route waypoint. Also note that the Active Route,
if not cancelled, will be automatically reactivated when the unit is powered up.
To stop navigation of the active route:
1. Press the ROUTES softkey.
2. Press the DELETE softkey.
3. Press the @0 key to confirm the delete route warning.
To save a newly created or modified Active Route, copy Route 0 to an open
storage route (Routes 1-19), as the Active Route will be overwritten by a new
route activation.
Map Res ievi Mode
Acthatiiig &' Dehiiiig
Activated Routes appear as solid lines.
Rte Start -^Епс! Description
0 DOCK
1 DOCK
2 ____ H
3 ________ H
A __________-I
5 ________ H
6 ____ H
7 ________ nti
t____
QO<
НОТЕ: This Wll not
delete route waypoints
from the waypoint iist.
№e Vou Sure?
YES NO
Use cursor to hiphtipht choice, EHT to accept