Garmin 210 - Manual (Page 67)

The GPSMAP’s track recording submenu lets you specify whether or not to
record a track plot (an electronic recording of your path) and define how it is
recorded. It also provides an indicator of the track memory used and a func­
tion to clear the track memory.
Recording Status lets you select one of three track recording options:
Off: no track plot will be recorded.
Fill: a track plot will be recorded until track memory is full.
Wrap: a track plot will be continuously recorded, wrapping through the
available memory (replacing the oldest data with new data).
Recording Interval defines the frequency that the track plot is recorded.
Time: records track plot based upon a user-defined time interval.
Distance: records track plot based upon a user-defined distance.
Resolution: records track plot based upon the variance from your course
over the ground. This setting is highly recommended for the most effi­
cient use of track memory. The distance value entered is the maximum
error allowed from the true course before recording a track point.
Interval Value lets you set the distance or time value for recording the track.
Erase Track Memory lets you clear all track plot positions from system
memory and start a new track plot. To erase the track memory:
1. Highlight the Erase Track Memory field and press
2. Move the field highlight to the 'Yes' prompt and press the( I key.
AUXILIARY MENU wm
Track Recording Seliip III
Track Recording Configuration
Reeonting Status Hrap
Recording Interval Resolution
Interval Value O.OSdS.
TrocR Memory Used OX
Erase Track Memory?
Prêts EMT to see list of options
111 ExK i
The ‘Track Memory Used'field displays the
percentage oj available memory currently
being used. If you are nearing 100% capacity,
you can save all existing track plots to an
optional user-programmable data card for
storage and uploading at a later date. See
page 58 for more information on user
data cards.
57