Rice Lake 520 HMI Digital Weight Indicator Installation Manual - Manual (Page 59)

53 520 Indicator Installation Manual
PRN.HANDSHK Printer port handshaking OFF, ON
PRN.STREAM Printer port streaming OFF, LFT, IND
PRN.FORMAT Printer port stream format DEFAULT8, CUSTOM, BUS FMT, DEFAULT7
PRNDEST Print destination EDP, PRN, BOTH
STR.POS Custom stream identifiers SPACE, NONE, +
STR.NEG Custom stream identifiers SPACE, NONE, –
STR.PRI Custom stream identifiers Specify replacement text for token
Example: STR.PRI=L
See Section 12.7 on page 77 for information more about custom
stream formatting.
STR.SEC
STR.GROSS
STR.NET
STR.TARE
STR.MOTION
STR.RANGE
STR.OK
STR.INVALID
Command Description Values
Table 9-6. SERIAL EDP Commands (Continued)
Command Description Values
SD Set date nnnnnn (enter using DATEFMT specified)
ST Set time hhmm (enter using 24-hour format)
DATEFMT Date format MMDDYY, DDMMYY, YYMMDD
DATESEP Date separator SLASH, DASH, SEMI
TIMEFMT Time format 12HOUR, 24HOUR
TIMESEP Time separator COLON, COMMA
CONSNUM Consecutive numbering 0–9 999 999
CONSTUP Consecutive number start-up value 0–9 999 999
PEAKHOLD Greatest net weight achieved OFF, NORMAL, BI-DIR, AUTO
THEORETIC Theoretical calibration OFF, ON
SAMPSIZ Count mode sample size 5, 10, 20, 50, 100
UID Unit identifier nnnnnnn (up to seven alphanumeric characters)
CNTMOD Count mode DSABLE, ENABLE
ACCUM Accumulator OFF, ON
ACCUM.RTZGRADS Grads above to allow accumulation 0-9999
KYBDLK Keyboard lock (disable keypad) OFF, ON
ZERONLY Disable all keys except ZERO OFF, ON
REGULAT Regulatory compliance NONE, OIML, NTEP, CANADA
REGWORD Regulatory word for GROSS GROSS, BRUTTO
GRAVADJ Gravity adjustment OFF, ON
PROMPT#n-8
CKWEIGH Checkweigh Mode OFF, ABS, PERCENT
CK_OVER Absolute Over Value number
CK_OVER_PCT Percent Over Value number
CK_PRINT OFF, TARGET, WAITSS
Table 9-7. PROGRM EDP Commands