Rice Lake 520 HMI Digital Weight Indicator Installation Manual - Manual (Page 39)

33 520 Indicator Installation Manual
SPLSIZ 10
20
50
100
5 Sample size. Specify the default sample size used for counting scale operations. Sample size
can be changed in counting mode during sample acquisition.
Level 4 submenus
CKZBAND 10D
20D
50D
OFF
1D
2D
5D Check Zero Band. Specifies a band around gross zero in which the scale must pass in order to
re-arm the TARGET autoprint and in which the digital outputs are set to OFF. Set in display
divisions.
CKPRINT OFF
WAITSS
TARGET Check Print. Enables the autoprint feature. WAITSS and TARGET automatic print modes both
perform automatic transmission of serial data whenever the scale settles out of motion within
the ACCEPT band. WAITSS enables the autoprint feature when the scale goes into motion;
TARGET enables autoprint whenever the scales enters then leaves the specified CKZBAND.
PROGRM Menu
Parameter Choices Description
Table 3-6. Program Menu Parameters (Continued)