Elecraft P3 High-Performance Panadapter Manual - Manual (Page 17)

17
“U” Cursor on Upper Sideband Signal at 14.250 kHz
VFO A has a green cursor and VFO B has a
magenta cursor unless split mode is activated at the
K3. In split mode, the VFO B cursor changes to red
as a reminder that you will transmit on that
frequency. Similarly, if XIT is on, or if split is off
and RIT is on, a new red cursor appears at the
transmit frequency.
Red Bar Cursor Showing Transmit Frequency Above
the Receive Frequency
Whenever a cursor is tuned off-screen a small arrow
of the same color appears at the bottom left or right
of the spectrum window to indicate the direction to
the missing cursor
The VFO B cursor may be turned off using
MENU:VFO B
. Tap the knob to select ON or OFF
as desired.