beautypg.com

Replacing the battery latch assembly – Dell Precision M6300 (Late 2007) User Manual

Page 222

background image

222

Adding and Replacing Parts

10 Remove the plastic battery-latch assembly by twisting the assembly

slightly and lifting it out of the channel and away from the computer base.

Replacing the Battery Latch Assembly

1 Insert the latch assembly into the channel on the computer base, and press

it into place.

2 Using a small screwdriver, hook the spring over the hook on the computer

base.

3 Place the battery latch release under the computer base, line it up with the

hole in the base, and then replace the screw in the assembly.

Ensure that the newly installed latch moves smoothly and freely when
pushed and released.

4 Replace the hard drive bay and reinsert the four M2 x 3-mm screws.
5 Replace the system board and the four M2.5 x 5 screws.

1

hook

2

spring

1

battery latch assembly

1

book.book Page 222 Wednesday, August 13, 2008 12:12 PM