Dell Precision M6300 (Late 2007) - Manual (Page 203)

Adding and Replacing Parts
203
6 Remove the processor thermal-cooling assembly (see "Removing the
Processor Thermal-Cooling Assembly" on page 200).
NOTICE:
When removing the processor module, pull the module straight up. Be
careful not to bend the pins on the processor module.
7 To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the
ZIF-socket cam screw counterclockwise until it comes to the cam stop.
NOTE:
The ZIF-socket cam screw secures the processor to the system board. Take
note of the arrow on the ZIF-socket cam screw, which indicates the direction to
turn the cam screw.
8 Lift the processor module from the ZIF socket.
1 ZIF-socket cam screw 2 pin-1 corner of microprocessor
3 Z IF-socket
1
2
3
book.book Page 203 Wednesday, August 13, 2008 12:12 PM