Dell Precision M6300 (Late 2007) - Manual (Page 117)

Troubleshooting
117
NOTE:
The next steps change the boot sequence for one time only. On the
next start-up, the computer boots according to the devices specified in the
system setup program.
3 When the boot device list appears, highlight CD/DVD/CD-RW and press
.
4 Select the Boot from CD-ROM option from the menu that appears and
press .
5 Type
1 to start the Resource CD menu and press to proceed.
6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If
multiple versions are listed, select the version appropriate for your
computer.
7 When the Dell Diagnostics Main Menu appears, select the test you want
to run.
Dell Diagnostics Main Menu
1 After the Dell Diagnostics loads and the Main Menu screen appears, click
the button for the option you want.
NOTE:
It is recommended that you select Test System to run a complete test on
your computer.
2 After you have selected the Test System option from the main menu, the
following menu appears:
NOTE:
It is recommended that you select Extended Test from the menu below to
run a more thorough check of devices in the computer.
Option Function
Test Memory Run the stand-alone memory test
Test System Run System Diagnostics
Exit Exit the Diagnostics
Option Function
Express Test Performs a quick test of devices in the
system. This typically can take 10 to 20
minutes.
book.book Page 117 Wednesday, August 13, 2008 12:12 PM