Dell Precision M6300 (Late 2007) - Manual (Page 196)

196
Adding and Replacing Parts
7 Replace the display assembly (see "Replacing the Display Assembly" on
page 179).
8 Replace the keyboard (see "Keyboard" on page 174).
9 Replace the hinge cover (see "Replacing the Hinge Cover" on page 174).
Speakers
Removing the Speakers
CAUTION:
Before you begin the following procedure, follow the safety
instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery
(see "Before Working Inside Your Computer " on page 156 ) before working inside the
computer.
1 Follow the instructions in "Before Working Inside Your Computer" on
page 156.
2 Remove the hinge cover (see "Removing the Hinge Cover" on page 173).
3 Remove the display assembly (see "Replacing the Display Assembly" on
page 179).
4 Remove the keyboard (see "Keyboard" on page 174).
5 Remove the palm rest (see "Removing the Palm Rest" on page 193).
NOTICE:
Handle the speakers with care to help prevent damage to them.
6 Disconnect the speaker cable connector from the connector on the system
board.
7 Lift the tape that secures the speaker cables to the computer base, and
disengage the cables from the cable guides.
8 Remove the four M2.5 x 5-mm screws from the speakers (two on each
speaker).
9 Remove the speakers.
book.book Page 196 Wednesday, August 13, 2008 12:12 PM