Dell Precision M6300 (Late 2007) - Manual (Page 174)

174
Adding and Replacing Parts
Replacing the Hinge Cover
With the display open all the way (180 degrees) so that it lies flat against the
work surface, snap the cover back into place, starting from left to right.
Keyboard
CAUTION:
Before you begin the following procedure, follow the safety
instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery
(see "Before Working Inside Your Computer" on page 156) before working inside the
computer.
1 Follow the instructions in "Before Working Inside Your Computer" on
page 156.
2 Remove the hinge cover (see "Removing the Hinge Cover" on page 173).
3 Remove the two M2.5 x 5-mm screws at the top of the keyboard.
1 hinge cover
1
book.book Page 174 Wednesday, August 13, 2008 12:12 PM