Dell Precision M6300 (Late 2007) - Manual (Page 205)

Adding and Replacing Parts
205
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery
(see "Before Working Inside Your Computer" on page 156) before working inside the
computer.
1 Follow the instructions in "Before Working Inside Your Computer" on
page 156.
2 Remove the hinge cover (see "Removing the Hinge Cover" on page 173).
3 Remove the keyboard (see "Keyboard" on page 174).
4 Remove the display assembly (see "Removing the Display Assembly" on
page 176).
5 Remove the palm rest (see "Removing the Palm Rest" on page 193).
NOTE:
Remove the video card/thermal-cooling assembly as a single unit. Do not
separate the thermal-cooling assembly from the video card.
6 Loosen the four captive screws on the video card/thermal-cooling
assembly.
7 Lift the video card/thermal-cooling assembly from the system board.
NOTE:
The appearance of the video card/thermal-cooling assembly may vary,
depending on your computer configuration.
book.book Page 205 Wednesday, August 13, 2008 12:12 PM