Dell Precision M6300 (Late 2007) - Manual (Page 168)

168
Adding and Replacing Parts
4 Ground yourself by touching one of the metal connectors on the back of
the computer.
NOTE:
If you leave the area, ground yourself again when you return to the
computer.
5 If a mini-cmini-cardard is not already installed, go to step 6. If you are
replacing a mini-card, remove the existing card:
a Disconnect the antenna cables from the mini-card.
NOTE:
Depending on the type of Mini Card you have, not all cables may be in use.
b Release the mini-card by pushing the metal securing clips toward the
back of the computer until the card pops up slightly.
c Lift the mini-card out of its connector.
1 antenna connectors (2) 2 mini-card
3 mini-card connector
1
3
2
book.book Page 168 Wednesday, August 13, 2008 12:12 PM