Dell Precision M6300 (Late 2007) - Manual (Page 186)

186
Adding and Replacing Parts
Removing the Display Panel
CAUTION:
Before you begin the following procedure, follow the safety
instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by touching an unpainted metal surface on the computer.
1 Follow the instructions in "Before Working Inside Your Computer" on
page 156.
2 Remove the display assembly (see "Removing the Display Assembly" on
page 176).
3 Remove the display bezel (see "Removing the Display Bezel" on page 182).
4 Loosen the captive ground screw that attaches the display-panel ground
wire to the display back cover.
1 display panel 2 M2 x 3-mm screws (8)
3 display back cover 4 grounding wire and captive screw
1
2
3
4
book.book Page 186 Wednesday, August 13, 2008 12:12 PM