Dell Precision M6300 (Late 2007) - Manual (Page 219)

Adding and Replacing Parts
219
Battery Latch Assembly
Removing the Battery Latch Assembly
CAUTION:
Before you begin the following procedure, follow the safety
instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery
(see "Before Working Inside Your Computer" on page 156) before working inside the
computer.
1 Follow the instructions in "Before Working Inside Your Computer" on
page 156.
2 Remove the hinge cover (see "Removing the Hinge Cover" on page 173).
3 Remove the keyboard (see "Keyboard" on page 174).
4 Remove the display assembly (see "Removing the Display Assembly" on
page 176).
5 Remove the palm rest (see "Replacing the Palm Rest" on page 195).
6 Remove the system board (see "Removing the System Board" on
page 212).
7 Remove the hard drive bay by removing the four M2 x 3-mm screws, and
lifting out the bay.
NOTE:
You can remove the hard drive bay without removing the ExpressCard
cage from the hard drive bay.
book.book Page 219 Wednesday, August 13, 2008 12:12 PM