Dell Precision M6300 (Late 2007) - Manual (Page 190)

190
Adding and Replacing Parts
NOTICE:
To help prevent damage to the system board, remove the main battery
(see "Before Working Inside Your Computer" on page 156) before working inside the
computer.
1 Follow the instructions in "Before Working Inside Your Computer" on
page 156.
2 Remove the hinge cover (see "Removing the Hinge Cover" on page 173).
3 Remove the keyboard (see "Keyboard" on page 174).
4 Remove the existing coin-cell battery:
a Disconnect the battery cable connector from the system board.
b Press the release latch on the side of the coin-cell battery
compartment, and lift up the battery.
NOTE:
You may experience slight resistance when you lift the battery
because of an adhesive underneath the battery that holds it in place.
1
2
3
book.book Page 190 Wednesday, August 13, 2008 12:12 PM