Network connection setup, Network printer setup on a local network – Dell C3760dn Color Laser Printer User Manual

Page 84

Installing Printer Drivers on Windows

Computers

10 To change the printer name, enter the printer name in the Printer name box, and then click Next.

To use this printer as the default printer, select the

Set as the default printer check box, and then click Next.

11 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer

so that others on your network can find and use it.

12 Click Next.

Installation starts.

13 As the driver installation is completed, click Print a test page to print a test page.
14 Click Finish.

Windows 8, Windows 8 64-bit Edition, or Windows Server 2012

1 Extract the zip file you downloaded to your desired location.
2 Under Desktop mode, right-click the bottom left corner of the screen, and then click Control Panel.
3 Click Hardware and Sound (Hardware for Windows Server 2012) → Devices and Printers → Add a printer.
4 Click Have Disk to display the Install From Disk dialog box.
5 Click Browse, and then select the extracted folder in step 1.
6 Click OK.
7 Select your printer name and click Next.
8 To change the printer name, enter the printer name in the Printer name box, and then click Next. Installation

starts.

9 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer

so that others on your network can find and use it. Click Next.

10 As the driver installation is completed, click Print a test page to print a test page. To use this printer as the default

printer, select the Set as the default printer check box.

11 Click Finish.

Network Connection Setup

NOTE:

To use this printer in a Linux environment, you need to install a Linux driver. For more information on how to install and

use these, see "Installing Printer Drivers on Linux Computers (CUPS)."

Network Printer Setup on a Local Network

For installing PCL and PS printer driver

1 In the Easy Setup Navigator window, click Installing Driver and Software to launch the installation software.
2 Select Network Installation, and then click Next.
3 Select Local Installation, and then click Next.
4 Select the printer you want to install from the printer list, and then click Next. If the target printer is not displayed

on the list, click Refresh to refresh the list or click Add Printer to add a printer to the list manually. You may specify

the IP address and port name at this point.
If you have installed this printer on the server computer, select the

I am setting up this printer on a server check

box.

NOTE:

When using AutoIP,

0.0.0.0

is displayed in the installer. Before you can continue, you must enter a valid IP

address.