Verifying the ip settings, Verifying the settings using operator panel, Verifying the settings using ping command – Dell C3760dn Color Laser Printer User Manual

Page 75: See "verifying the ip settings

Setting the IP Address

Verifying the IP Settings

You can confirm the settings by using the operator panel, printing the printer settings report, or using the ping

command.

Verifying the Settings Using Operator Panel

1 Press the

(Menu) button.

2 Press the

button until Admin Settings is highlighted, and then press the

(Set) button.

3 Press the

button until Network is highlighted, and then press the

(Set) button.

4 Press the

button until TCP/IP is highlighted, and then press the

(Set) button.

5 Press the

button until IPv4 is highlighted, and then press the

(Set) button.

Check the IP address displayed on the operator panel.

Verifying the Settings Using Printer Settings Report

1 Print the printer settings report.

For details about how to print a printer settings report, see "Report / List."

2 Verify the correct IP address, subnet mask, and gateway address are listed in the printer settings report under

Network (Wired) or Network (Wireless).
If the IP address shows 0.0.0.0 (the factory default), an IP address has not been assigned. To assign one for your

printer, see "Assigning an IP Address."

Verifying the Settings Using Ping Command

Ping the printer and verify that it responds. For example, at a command prompt on a network computer, type ping

followed by the new IP address (for example, 192.168.0.11):

ping 192.168.0.11
If the printer is active on the network, you will receive a reply.