Updating your driver to detect hard disk – Dell C3760dn Color Laser Printer User Manual
Page 62
60
Installing Optional Accessories
7 Close the left side cover, and then slide it towards the front of the printer.
8 Turn the screw clockwise.
9 Turn on the printer.
10 Print the printer settings report to confirm that the newly installed hard disk is detected by the printer.
For details about how to print a printer settings report, see "Report / List."
11 Confirm the amount of Hard Disk listed in the printer settings report under Printer Options.
If the hard disk is not listed, turn off the printer, unplug the power cable, and re-install the hard disk.
12 If you installed the hard disk after installing the printer driver, update your driver by following the instructions for
the operating system you are using. If the printer is on a network, update the driver for each client.
Hard disk can be specified on the printer driver only when hard disk or RAM disk is available on the printer driver.
Updating Your Driver to Detect Hard Disk
NOTE:
When you use XPS driver, driver updating is not required.
When Using PCL Driver
Windows 8/
Windows 8 x64/
Windows Server 2012
1
Under Desktop mode, right-click the bottom left corner of the screen, and then click
Control Panel → Hardware and Sound (Hardware for Windows Server 2012) → Devices
and Printers.
2
Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3
Click the Options tab, and then select Get Information from Printer.
4
Click Apply, and then click OK.
5
Close the Devices and Printers dialog box.