Entering values – Dell C3760dn Color Laser Printer User Manual

Page 346

344

Maintaining Your Printer

NOTE:

If it is difficult to choose only one value, as in the case that there seem to be two values closest to a straight line, take the

value between the two. For example, in the figure above, -6 and -8 are the values closest to a straight line, so you would enter the

value -7.

Slow Scan

On the Chart 2 of the color registration chart, find the medium line within the range of white area for each color

pattern (PY, PM, and PC). If you find the medium line, make a note of the value (-9

+9) indicated by the

medium line for each color.
When the value is 0 for each color, you do not need to adjust the color registration for the slow scan.
When the value is not 0, enter the value using the procedure in "Entering Values."

Entering Values

When Using the Operator Panel

Using the operator panel, enter the values found in the color registration chart to make adjustments.

1 Press the

(Menu) button.

2 Press the

button until Admin Settings is highlighted, and then press the

(Set) button.

3 Press the

button until Maintenance is highlighted, and then press the

(Set) button.

4 Press the

button until Color Reg Adjust is highlighted, and then press the

(Set) button.

5 Press the

button until Enter Number is highlighted, and then press the

(Set) button.

6 Ensure that LY is highlighted and press the

button to specify the values.

7 Press the

button to move the highlight to the next value.

8 Press the

(Set) button.

RY is highlighted.

9 Repeat steps 6 to 8 to enter the desired values, and then press the

(Set) button.

Lattice pattern