Dell C3760dn Color Laser Printer - Manual (Page 376)

374 Troubleshooting Guide
Toner smears or print comes off
4 The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a On the General tab, change the Paper Type setting.
Does this solve your problem?
The task is complete. Go to action 5.
5 Verify that the correct print media is being used. See "Supported Paper
Types." If not, use the print media recommended for the printer.
Does this solve your problem?
The task is complete. Go to action 6.
6 Clean inside the printer by using the cleaning rod. See "Cleaning the
Raster Optical Scanner (ROS) Window."
a After the cleaning is completed, click Chart Print on the Diagnosis
tab.
b Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does this solve your problem?
The task is complete. Go to action 7.
7 Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click 4 Colors Configuration Chart.
The 4 Colors Configuration Chart is printed.
Does this solve your problem?
The task is complete. Contact Dell.
Action Yes No
1 The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a On the General tab, change the Paper Type setting.
Does this solve your problem?
The task is complete. Go to action 2.
2 Verify that the correct print media is being used. See "Supported Paper
Types." If not, use the print media recommended for the printer.
Does this solve your problem?
The task is complete. Go to action 3.
Action Yes No