Dell C3760dn Color Laser Printer - Manual (Page 178)

176 Understanding the Tool Box Menus
Printer Maintenance
The Printer Maintenance tab includes the System Settings, Maintenance, Tray Settings, Panel Language, TCP/IP
Settings, Network Settings, and USB Direct Print Defaults pages.
System Settings
Purpose:
To configure the power management of the printer, auto clear time, alarm tones, time-out time, date and time,
mm/inch setting, job log auto print, Print ID, setting of the additional memory, and setting of the substitute tray.
Values:
Power Saver Timer Sleep *1 Available Range:
1–60 minutes
Sets the amount of transition time to the Sleep mode
after the printer finishes a job.
Deep Sleep *1 Available Range:
1–60 minutes
Sets the amount of transition time between the Sleep
mode and the Deep Sleep mode.
Auto-Off Timer *2 0 Sets the time it takes to automatically turn off the printer
after the printer has entered the Deep Sleep mode.
Available Range:
60–1440 minutes
Auto Reset 45 seconds Sets the amount of time before the printer automatically
resets the settings on the operator panel to the defaults
when no additional settings are made.
1 minute
2 minutes
3 minutes
4 minutes
Fault Time-out 0 Sets the amount of time the printer waits before canceling
a job when the job stops abnormally.
Available Range: 3–300 seconds
Job Time-out 0 Sets the amount of time the printer waits for additional
data from the computer before it cancels the job.
Available Range: 5–300 seconds
Date & Time Time Zone Sets the time zone.
Set Date Sets the date.
Set Time Sets the time. You can select AM or PM when Time
Format is set to 12 Hour.
Date Format Sets the date format.
Time Format Sets the time format in 24 Hour or 12 Hour.
Audio Tone Control Panel
Tone
Off Does not emit a tone when the operator panel input is
correct.
On Emits a tone when the operator panel input is correct.
Invalid Key Tone Off Does not emit a tone when the operator panel input is
incorrect.
On Emits a tone when the operator panel input is incorrect.
Machine Ready
Tone
Off Does not emit a tone when the printer becomes ready.
On Emits a tone when the printer becomes ready.
Job Completed
Tone
Off Does not emit a tone when a print job is complete.
On Emits a tone when a print job is complete.
Fault Tone Off Does not emit a tone when a job ends abnormally.
On Emits a tone when a job ends abnormally.