Available fax settings options – Dell 2155cn/cdn Color Laser Printer User Manual

Page 384

382

Faxing

FILE LOCATION: C:\Users\fxstdpc-

admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm

D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY

6 Press

button until the desired setting is highlighted or enter the

value using the numeric keypad, and then press the

(Set) button.

If necessary, repeat steps 5 and 6.

To return to the top screen of the

(Menu) menu, press the

(All

Clear) button.

Available Fax Settings Options

You can use the following settings options for configuring the fax system:

Option

Description

Receive Mode

You can select the default fax receiving mode.

• Fax: (automatic receive mode)
• Telephone (manual receive mode): Automatic fax reception is

turned off. You can receive a fax by picking up the handset of
the external telephone and then pressing the remote receive
code, or by setting

OnHook

(you can hear voice or fax

tones from the remote machine) and then pressing the (Start)
button.

• Telephone/Fax: When the printer receives an incoming fax, the

external telephone rings for the time specified in

Auto Rec

Fax/Tel

, and then the printer automatically receives a fax.

If an incoming call is not a fax, the printer beeps from the
internal speaker indicating that the call is a telephone call.

• Ans Machine/Fax: The printer can share a telephone line with

an answering machine. In this mode, the printer will monitor
the fax signal and pick up the line if there are fax tones. If the
phone communication is using serial transmission in your
country (such as Germany, Sweden, Denmark, Austria,
Belgium, Italy, France and Switzerland), this mode is not
supported.

• DRPD: Before using the Distinctive Ring Pattern Detection

(DRPD) option, distinctive ring service must be installed on
your telephone line by the telephone company. After the
telephone company has provided a separate number for faxing
with a distinctive ring pattern, configure the fax setup to
monitor for that specific ring pattern.