Dell 2155cn/cdn Color Laser Printer - Manual (Page 61)

Installing Optional Accessories 59
2 Select the total amount of the installed printer memory for the memory
capacity setting.
3 Click Apply, and then click OK.
4 Close the Printers and Faxes(, Printers, or Devices and Printers) dialog
box.
Installing the Optional 250-Sheet Feeder
CAUTION: If you install the optional 250-sheet feeder after setting up the printer,
be sure to turn off the printer, unplug the power cable, and disconnect all cables
from the back of the printer before starting this task.
1 Ensure that the printer is turned off, and then disconnect all cables from the
back of the printer.
2 Remove all packaging from the optional 250-sheet feeder.
3 Place the optional 250-sheet feeder in the location that the printer is located.
4 Pull the standard 250-sheet tray out of the printer about 200 mm. Hold the
standard 250-sheet tray with both hands, and remove it from the printer.
5 Lift the printer and align the five guide pins of the optional 250-sheet feeder
with the holes at the bottom of the printer. Gently lower the printer onto the
optional 250-sheet feeder.
CAUTION: Two people are required to lift the printer. The printer should be
lifted holding the front and back. Never lift the printer from its sides.