Sending the scanned file on the network, Scanning to a usb memory, Scanning to a usb memory (s – Dell 2155cn/cdn Color Laser Printer User Manual
Page 370: See "scanning to a usb memory

368
Scanning
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section19.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
Sending the Scanned File on the Network
1 Load the document(s) facing up with top edge in first into the ADF.
OR
Place a single document facing down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document."
2 Press the
(Scan) button.
3 Press
button
until
Scan to Network is highlighted, and then press
the
(Set) button.
4 Ensure that Scan to is highlighted, and then press the
(Set) button.
5 Press
button until the desired address book is highlighted, and then press
the
(Set) button.
Network(Computer): Stores the scanned image on the computer by
using the SMB protocol.
Network(Server): Stores the scanned image on the server by using the
FTP protocol.
Search Address Book: Searches a network address from the Address
Book.
NOTE:
The network addresses need to be registered before you can select
Network(Computer)
or
Network(Server)
on the operator
panel.
6 Press
button until the desired destination is highlighted, and then press
the
(Set) button.
7 Specify the scan options such as file format, color mode, resolution, and
document size. For details, see "File Format."
8 Press the (Start) button to begin sending the scanned files.
Scanning to a USB Memory
The Scan to USB Memory feature allows you to store scanned image directly to
a USB memory attached to the printer without using software.