Wps-pbc – Dell 2155cn/cdn Color Laser Printer User Manual
Page 78
76
Installing Optional Accessories
5 Press
button until Wireless Setup is highlighted, and then press the
(Set) button.
6 Press
button until WPS is highlighted, and then press the
(Set) button.
7 Press
button
until
PIN Code is highlighted, and then press the
(Set)
button.
8 Write down the 8-digit PIN code displayed on the first line of the panel
display or press
button until Print PIN Code is highlighted, and
then press the
(Set) button.
The PIN code is printed.
9 Ensure that Start Configuration is highlighted, and then press the
(Set) button.
10 Ensure that the message Please wait Wireless Setting is
displayed, and enter the PIN code displayed on the step 7 into the wireless
LAN access point (Registrar).
NOTE:
For WPS operation on the wireless LAN access point, refer to the
manual supplied with the wireless LAN access point.
11 When the WPS operation is successful and the printer is rebooted, wireless
LAN connection setting is completed.
WPS-PBC
You can start Push Button Control only from the operator panel.
NOTE:
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a
method to authenticate and register devices required for wireless configuration, by
pressing the button provided on the access point via wireless routers, and then
performing WPS-PBC setting on the operator panel. This setting is available only
when the access point supports WPS.
1 Press the
(Menu) button.
2 Press
button
until
System Setup is highlighted, and then press the
(Set) button.
3 Press
button
until
Admin Menu is highlighted, and then press the
(Set) button.
4 Press
button
until
Network is highlighted, and then press the
(Set)
button.