Dell PowerVault MD3220 - Manual (Page 90)

90 Configuration: About Your Host
4 Click Yes.
The host is moved to the selected host group with the following mappings:
• The host retains the specific virtual disk mappings assigned to it.
• The host inherits the virtual disk mappings assigned to the host group
to which it is moved.
• The host loses the virtual disk mappings assigned to the host group
from which it was moved.
Removing a Host Group
To remove a host group:
1 In the AMW, select the Mappings tab, select the host node in the
Topology pane.
2 Perform one of these actions:
• Select Mappings Remove.
• Right-click the host node, and select Remove from the pop-up menu.
The Remove dialog is displayed.
3 Click Yes.
The selected host group is removed.
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
Host Topology
Host topology is the organization of hosts, host groups, and host interfaces
configured for a storage array. You can view the host topology in the
Mappings tab of the AMW. For more information, see "Using the Mappings
Tab" on page 86.
The following tasks change the host topology:
• Moving a host or a host connection
• Renaming a host group, a host, or a host connection
• Adding a host connection
• Replacing a host connection
book.book Page 90 Tuesday, June 18, 2013 2:53 PM