Dell PowerVault MD3220 - Manual (Page 219)

Management: Installing Array Components 219
3 Remove the hard drives from:
– slots 0 to 2 in PowerVault MD3200
– slots 0 to 5 in PowerVault MD3220
See "Removing a Hard Drive" on page 204.
NOTE: Mark each hard drive with it’s slot position as you remove it.
4 Slide the control panel out of the chassis after:
– Pushing the release tab toward the front of the array in PowerVault
MD3200. See Figure 15-13.
– Pulling the release pin toward the front of the array in PowerVault
MD3220. See Figure 15-14.
Figure 15-13. Removing and Installing the Control Panel-PowerVault MD3200
1 control panel 2 release tab
2 1
book.book Page 219 Tuesday, June 18, 2013 2:53 PM