Dell PowerVault MD3220 - Manual (Page 239)

Troubleshooting: Your Storage Array Software 239
Finding Nodes
You can use the Find option to search for a particular node on the Logical tab,
the Physical tab, or the Mappings tab of the AMW. The search may be based
on a particular node name, the RAID level, virtual disk capacity, or specific
free capacity nodes. The search may be based also on one of these
combinations:
• The node name and the RAID level
• The node name and the virtual disk capacity
To find nodes:
1 In the AMW, select View Find.
2 Based on the type of search, select one of these options, and go to the
indicated step:
• Search by name – see step 3.
• Search by special criteria – see step 4.
3 Type the name of the node to be found in Find Node. See step 8.
4 Based on the search criteria, select one of these options, and go to the
indicated step:
• Find all virtual disks with RAID level—Go to step 5.
• Find all virtual disks with capacity—Go to step 6.
• Find all free capacity nodes—Go to step 7.
5 To search for all nodes based on their RAID level, perform these steps:
a Select Find all virtual disks with RAID level.
b Select the RAID level from the list.
c Go to step 8.
book.book Page 239 Tuesday, June 18, 2013 2:53 PM