Dell PowerVault MD3220 - Manual (Page 171)

Configuration: Premium Feature—Virtual Disk Copy 171
Copying the Virtual Disk
You can create a virtual disk copy by using the Create Copy Wizard.
CAUTION: Possible loss of data access – A virtual disk copy overwrites data on
the target virtual disk.
A virtual disk copy automatically makes the target virtual disk read-only to
hosts. You may want to keep this attribute enabled to preserve the data on the
target virtual disk.
CAUTION: If you decide not to preserve the data on the target virtual disk after the
virtual disk copy has completed, disable the Read-Only attribute for the target
virtual disk. For more information on enabling and disabling the Read-Only
attribute for the target virtual disk, see "Virtual Disk Read/Write Permissions" on
page 166.
To prevent write-protected error messages from being displayed, do not try to
access a source virtual disk that is participating in a virtual disk copy while the
virtual disk copy has a status of In Progress. Also, make sure that the Read-
Only attribute for the target virtual disk is disabled after the virtual disk copy
has completed to prevent error messages from being displayed.
To copy the virtual disk:
1 Stop all I/O activity to the source virtual disk and the target virtual disk.
2 Unmount any file systems on the source virtual disk and the target virtual
disk.
3 In the AMW, select the Logical tab and select the source virtual disk.
4 Select Virtual Disk Create Copy.
The Select Source Virtual Disk and Copy Type window is displayed.
5 In the Select source virtual disk area, select the appropriate virtual disk.
6 In the Select Copy Type area, select either Offline or Online Copy Type.
NOTE: An online virtual disk copy overwrites data on the target virtual disk
and automatically makes the target virtual disk read-only to hosts. After the
online virtual disk copy completes, use Copy Manager to disable the Read-
Only attribute for the target virtual disk. If you have used the target virtual disk
in a virtual disk copy before, make sure that you no longer need that data or
have backed it up in an accessible location.
The Select Target Virtual Disk window is displayed.
book.book Page 171 Tuesday, June 18, 2013 2:53 PM