Dell Latitude D630 XFR (Early 2008) - Manual (Page 55)

Dell TM XFR D630 Fully Rugged Notebook Service Manual
Page 55 of 106 Revision A01
b. Slide the module firmly into the slot at a 45-degree angle, and rotate the module
down until it clicks into place. If you do not feel the click, remove the module and
reinstall it.
NOTE: If the memory module is not installed properly, the computer may not boot properly. No
error message indicates this failure.
1 tab 2 notch
5. Replace the memory module cover, and use the 4 screws to secure the cover.
NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to
close may damage your computer.
6. Insert the battery into the battery bay, or connect the AC adapter to your computer and an
electrical outlet.
7. Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the
system configuration information.
To confirm the amount of memory installed in the computer, click Start -> Help and Support ->
Use Tools to view your computer information and diagnose problems -> My Computer
Information.
10 Display Assembly