Dell Latitude D630 XFR (Early 2008) - Manual (Page 100)

Dell TM XFR D630 Fully Rugged Notebook Service Manual
Page 100 of 106 Revision A01
2. Complete the seating of the system board and again verify the cables are in the correct
positions, and the 3 gaskets for the power port, rear USB port and side USB port are correctly
positioned.
3. Secure the system board using the 4 M2.5 x 5-mm screws (labeled with silver triangles on the
system board).
4. Reconnect the cables near the WLAN card and the modem connector to the system board.
5. Reconnect the fan cable to the system board.
6. Install the processor (see
278H
Installing the Processor).
7. Install the processor thermal-cooling assembly (see
279H
Installing the Processor Thermal-Cooling
Assembly).
8. Install any smart cards or smart card blanks into the smart card slot.
9. Install the PC card reader (see
280H
Installing the PC Card Reader Cage).
10. Install the speaker (see
281H
Installing the Speaker).
11. Install any wireless communication cards (see
282H
WWAN, FCM & SIM Cards,
283H
Wireless Local Area
Network (WLAN) Cards,
284H
Internal Card with Bluetooth® Wireless Technology).
12. Install the palm rest (see
285H
Installing the Palm Rest).
13. Install the memory module (see
286H
Memory).
14. Install any media bay devices (see
287H
XBay Devices).
15. Install the keyboard (see
288H
Keyboards).
16. Install the hinge cover (see
289H
Installing the Hinge Cover).
17. Install the HDD (see
290H
Hard Drive).
Ensure cables
are properly
routed.