Cyclades User's Guide - Manual (Page 79)

Introduction 63
KVM Expander
LEDs on the KVM Expander
The following table describes the LED activities on the KVM Expander.
Power Outlets on the KVM Expander
The KVM Expander has a power connector for power input and a power
outlet for daisy chaining additional KVM Expanders or any other device.
Caution! The total amount of power consumed by devices daisy-chained to the KVM
Expander must not exceed seven amps.
Figure 1-13: Power components on KVM Expander Back Panel
Table 1-25: LED Activities on the KVM Expander
Number Label Function Color/Status
1, 3 User A & User B Connection Status • Green - Lights when a
connection is established and
operational.
• Orange - Lights when a
connection to a port is
attempted by the "master"
KVM switch.
• Off - When no connection is
active or attempted.
2, 4 User A & User B Power • Green and Orange - Blinks
when the KVM Expander is
powered on and operates
normally.
Power connector Power outlet
Power switch