Steps in wizard mode [wizard, Step 1: security profile [wizard, Pre-defined security profiles – Cyclades User's Guide User Manual
Page 159
Web Manager for Administrators
143
Wizard Mode
Steps in Wizard Mode [Wizard]
Four configuration steps display in the left menu of the Web Manager in
Wizard mode. The following table lists the sections where the steps are
described.
Step 1: Security Profile [Wizard]
The first step in configuring your AlterPath KVM/net is to define a Security
Profile.
A Security Profile consists of a set of parameters that can be configured in
order to have more control over the services that are active at any time. There
are three pre-defined security profiles with pre-set parameters. In addition, a
Custom profile is provided where an administrator can configure individual
protocols and services.
Pre-defined Security Profiles
There are three pre-defined security profiles:
1. Secure - The Secure profile disables all protocols except SSHv2 and
HTTPS. SSH root access is not allowed. Direct access to KVM
connections are not available.
2. Moderate (Default) - The Moderate profile is the recommended security
level. This profile enables SSHv1, SSHv2, HTTP, HTTPS, and Telnet. In
addition, ICMP and HTTP redirection to HTTPS are enabled. Direct
access to KVM connections are not available.
To Add a Syslog Server [Wizard]
To Delete a Syslog Server [Wizard]
Step 1: Security Profile [Wizard]
Step 2: Network Settings [Wizard]
Step 3: Access [Wizard] [Wizard]