Cyclades User's Guide - Manual (Page 274)

Configuration
258 AlterPath KVM/net Installation, Administration, and User’s Guide
8. Complete the form and when done.
9. Click the OK button.
10.Verify your entry or modification on the SNMP form.
11.Click “apply changes” to complete the procedure.
Notifications
The Notifications form allows you to configure the KVM/net to monitor and
send notifications on the following system events by the way of SNMP traps.
• User Login
• User Log out
• Authentication failure
• Authentication success
• System reboot
In order to send notifications on these events to an SNMP management
application make sure to activate the SNMP service through Security >
Profiles > Custom.
Field Name Definition
Username Name of user account accessing the
KVM/net.
Source SNMP v1 and v2 only. Valid entries are
“default” or a subnet address, for example,
193.168.44.0/24
.
OID Object Identifier. Each managed object has a
unique identifier.
Permission Select the permission type:
• Read Only – Read-only access to the entire
MIB except for SNMP configuration objects.
• Read/Write – Read-write access to the entire
MIB except for SNMP configuration objects.