Cyclades User's Guide - Manual (Page 217)

Web Manager for Administrators 201
Configuration
See “To Connect Computers to KVM Ports” on page 80 for instructions on
physically connecting a server to a KVM/net port.
Note: RDP connections does not work if IPSec is used to communicate with a RDP
enabled server. NAT is used when a connection is established from the
workstation to a RDP enabled server. IPSec does not allow NAT'ed packets.
Note: Remote drives and printers are accessible through RDP. When you are
connected to a RDP server, the drives and printers on the server are accessible
as they were installed locally. Therefore, it is possible to print a file through
the RDP server, or drag and drop files from the RDP server to the local
station.
T To Add or Modify an inband (RDP) Server
See the previous section “Prerequisites for Inband Access to RDP Servers” on
page 200 for prerequisite information to this procedure.
1. In Expert mode, go to: Configuration>Inband.
The Inband form appears.
2. To add a server to the list, click Add.
The Configure RDP Servers dialog box appears.