To set up a preconfigured kvm/net, Additional configuration tasks, Der “to set up a preconfigured kvm/net – Cyclades User's Guide User Manual
Page 121
Installation
105
Additional Configuration Tasks
T
To Set Up a Preconfigured KVM/net
Perform the tasks shown in the following table with a KVM/net that has been
preconfigured as described in“To Preconfigure the KVM/net” on page 104.
After the tasks are completed in the order shown, a remote administrator can
bring up the Web Manager by entering the KVM/net’s fixed IP address in a
browser.
Additional Configuration Tasks
See the following sections for other procedures.
Task
Where Documented
1
Set up the AlterPath KVM/net.
“Setting Up the KVM/net” on page 75
2
Make an Ethernet connection.
“Making an Ethernet Connection” on
page 77
3
Connect computers and other devices.
“Connecting Servers to the KVM Ports”
on page 78
4
Power on the KVM/net and connected
devices.
“Powering On the KVM/net and
Connected Devices” on page 83
Task
Where Documented/Notes
Disabling Mouse Acceleration
“Disabling Mouse Acceleration” on page 106
Required Security Settings For Internet
Explorer
“Required Security Settings For Internet
Explorer” on page 109
Assigning Your Own TCP Viewer Port
Address