Cyclades User's Guide - Manual (Page 195)

Web Manager for Administrators 179
Configuration
Table 4-5: IP Users form parameters
T To Configure Local User 1 and User 2 Sessions
Perform this procedure if you want to redefine the parameters that apply to
KVM port sessions when a local user is directly logged in to the KVM/net.
1. In Expert mode, go to Configuration>KVM>General>.
2. To configure parameters for the User 1 port, select the User 1 tab.
3. To configure parameters for the User 2 port, select the User 2 tab.
Field Name Definition
Idle Timeout (min) Sets the maximum time (in minutes) for the session to be idle
before it is closed. The default value is 3 minutes. The maximum
value is 60 minutes. A value of 0 disables the idle timeout.
TCP Viewer Ports Change the number of the TCP port used for the AlterPath Viewer.
[IP Users only.] The default is 5900+. You may need to change the
default, for example, if your firewall is blocking port 5900. (For
more details, see “TCP Ports” on page 20.) Port numbers 1-1024
are reserved. Indicate a range of ports by entering a plus sign (+)
after the first port number (as in 2500+) or by entering a dash
between two port numbers (as in 2500-2501). Indicate a set of
nonadjacent port numbers by separating port numbers with
commas (as in 2500, 2508).
IP Security Sets a desired encryption option. User can select no data
encryption, encrypt keyboard/mouse data only, or include video
encryption to the keyboard/mouse data. Another option allows
3DES encryption method implemented on a video session.
Escape Sequences Redefine the common escape sequence portion of each hot key,
which allow administrators to perform common actions while
connected to KVM ports.