Cyclades User's Guide - Manual (Page 223)

Web Manager for Administrators 207
Configuration
3. Make sure that an authentication server is specified for the selected
authentication type.
See “Configuring Authentication Servers for Logins to the KVM/net and
Connected Devices” on page 208.
T To Configure an Authentication Method for KVM Port Logins
This procedure configures a single authentication method that applies
whenever anyone attempts to log in to a device through a connected KVM
port.
1. Go to Configuration>KVM>General in Expert mode.
The General form appears.
2. Select an authentication method from the Port Authentication drop-down
list.
The default option is None.
3. Click “Done.”
4. Click “apply changes.”
The changes are stored in /etc/kvmd.conf on the KVM/net.
5. If you select any authentication method other than None or Local, make
sure that an authentication server is specified for the selected
authentication type.
See “Configuring Authentication Servers for Logins to the KVM/net and
Connected Devices” on page 208.