Installing the alterpath kvm rp, Alterpath kvm rp – Cyclades User's Guide User Manual
Page 145
Advanced Installation Procedures
129
Installing the AlterPath KVM RP
Installing the AlterPath KVM RP
With a CAT5 cable up to 500 feet long, the AlterPath KVM RP can be
connected to the User 2 port of the KVM/net unit, enabling the extended user
to perform local administration tasks or to select the local keyboard, video,
and mouse console between a local station and a server connected to the
KVM/net.
Tasks
Where Documented/Notes
1
Place the KVM RP on a desk or table up
to 500 feet away from the KVM/net.
You can use a CAT5 cable of up to 500
feet long to extend the local
administration of the KVM/net.
2
Connect the KVM RP to the KVM/net.
“To Connect the KVM RP to the KVM/
net” on page 131.
3
Connect a keyboard, monitor, and mouse
to the KVM RP.
“Options for Accessing the KVM RP” on
page 131
4
Supply power to and turn on the KVM
RP.
“Supplying Power to the KVM RP” on
page 132
5
Use the KVM RP to control the KVM/net. “Controlling the OSD Through the