Aux ports, Activity leds on the back of the kvm/net – Cyclades User's Guide User Manual
Page 26

Activity LEDs on the Back of the KVM/net
10
AlterPath KVM/net Installation, Administration, and User’s Guide
AUX Ports
The following figure shows the AUX port on the right back of the KVM/net.
Figure 1-6: AUX Ports
AUX – Serial port (RS-232) with RJ45 connector that can be used for the
following:
•
Connecting to an optional AlterPath PM
Up to 32 PMs can be daisy-chained for a total of 120 outlets. See “Power
Management” on page 40 for background information of power
management and see “Connecting AlterPath PMs to the KVM/net” on
page 117 for installation instructions.
•
Connecting to an optional external modem
See “Connecting an External Modem” on page 116
Activity LEDs on the Back of the KVM/net
The KVM/net comes with paired LEDs positioned on each side of the
following ports:
•
User 2
•
AUX
•
Ethernet
•
Console
AUX Port