Cyclades User's Guide - Manual (Page 221)

Web Manager for Administrators 205
Configuration
Configuring an Authentication Method
Configuration>Security>Authentication in Expert mode brings up the form
shown in the following figure.
Figure 4-22:Authentication Configuration Form
The administrator uses the Authentication forms for two main purposes:
• To select an authentication method for the KVM/net only.
The default authentication method for the KVM/net is Local. The
administrator can either accept the default or select one of the other
authentication methods from the drop-down list on the AuthType form.
See “To Configure an Authentication Method for KVM/net Logins” on
page 206 for the procedure.
Authentication Form Tabs
Pull-down Menu of Authentication Methods