Cyclades User's Guide - Manual (Page 218)

Configuration
202 AlterPath KVM/net Installation, Administration, and User’s Guide
The connected server must be a Windows (Win2000 or NT) Terminal
Server with RDP enabled.
3. To modify a server, select the server on the list and click Modify.
4. In the Server Name field, specify a unique name for the inband server.
This name will appear in the drop-down list on the Connect to Server form.
Note: Once a name is given to an inband server, it cannot be modified. In order to
change the name of an inband server, you must delete the server configuration
and add the server again to the KVM/net.
5. In the IP Address field, enter the IP address of the inband server.
6. (Optional) In the Server Port field, specify a port to be used if it differs
from the default which is 3389.
All servers with RDP enabled are configured with 3389 as the default port
unless the administrator of the RDP server changes it.
7. To enable a back up KVM connection for the inband server, from the
KVM Port drop-down list, select the KVM port to which the inband server
is connected.