Cyclades User's Guide User Manual
Page 113
Installation
97
Performing Basic Network Configuration
b. Enter the IP address of the NTP server.
c. Save the changes.
4. To enter the date and time manually, do the following.
a. On the Date/time conf. form, select disabled.
The Date entry screen appears.
b. Enter the date in the format shown and press Enter.
The Time entry screen appears.
c. Enter the time in the format shown and save the changes.
If you are performing an initial configuration of basic networking
parameters, go to: “Completing Configuration Using the Web Manager”
on page 98.
Otherwise, go to the appropriate menu option for your next task.