Cyclades User's Guide - Manual (Page 407)

On Screen Display 391
Configure Menu Overview
The changes apply only to the currently accessed local station. For example, if
an administrator configures these settings while connected to the User 2 port,
these settings will be changed for all users who log in to the User 2 port, but
the User 1 port setting will remain unchanged.
The following diagram lists the configuration screens accessed through the
Configure>User station option. All the screens that appear after the
“Keyboard type” screen are for optionally redefining the command key
portion of the KVM connection hot keys: “Quit,” “Power Management,”
“Mouse/Keyboard Reset,” “Video Configuration,” “Switch Next,” “Switch
Previous,” and “Port Info.” See “Redefining Keyboard Shortcuts (Hot Keys)”
on page 35 for details, if needed.
Figure 7-3:User Station Configuration Screens
The following table shows the user station configuration screens.
Table 7-12:User Station Configuration Screens
Screen Description
Idle timeout The period of inactivity before the user is logged out from the
OSD. The default is 3 minutes.
Configure
— User station
— Idle timeout (min)
— Scr. saver time (min)
— Cycle time (sec)
— Keyboard type
— Quit
— Power Management
— Mouse/Keyboard Reset
— Video Configuration
— Switch Next
— Switch Previous
— Port Info