Cyclades User's Guide - Manual (Page 198)

Configuration
182 AlterPath KVM/net Installation, Administration, and User’s Guide
Devices
Selecting Configuration>KVM>Devices in Expert mode brings up the form
shown in the following figure.
Figure 4-19:KVM Device Configuration Form
The device name “master” stands for the KVM/net, which is the master KVM
unit in a cascaded configuration. Other device names may appear below
“master” depending on the number of KVM units cascaded to the master.
Selecting the name of a KVM unit in the list and clicking the “Ports” button
brings up a list of the KVM ports on the KVM/net, as shown in the following
figure.
When you select one or more ports, you can enable or disable the KVM
port(s) using the “Enable” or “Disable” buttons on the form.
When you select a port and click the “Modify” button, the dialog box shown
in the following figure appears.