Cyclades User's Guide - Manual (Page 445)

On Screen Display 429
Controlling the OSD Through the AlterPath KVM RP
5. Depending on your access privilege, perform one or more of the following
actions:
• If logged in as administrator, perform configuration tasks as described
in “Configure Menu Overview” on page 358, “System Info Menu” on
page 424, and “Reboot” on page 426.
• If desired, connect to devices that are physically connected to the
KVM/net.
See “Invoking OSD Using [PrintScreen] Key” on page 355 for
instructions.
• If desired, power manage devices that are plugged into a configured
AlterPath PM.
See “Power Management Menu” on page 357 for instructions.
T To Switch the KVM RP Video Display from
the OSD to the Local Computer
Do one of the following:
• Press the following keyboard shortcut:
Scroll Lock Scroll Lock L
• Press the Select Local-Remote button on the KVM RP front.
The green LED labelled Remote turns off, and the green LED labelled
Local lights on.
By default the KVM RP is set to beep when the monitor display switches
from local to remote. See “To Turn the Beeper On or Off When Switching
Between the Local and the Remote Work Stations” on page 430 for
instructions on turning the beep on or off.
T To Switch the KVM RP Video Display from
the Local Computer to the OSD
Do one of the following:
• Press the following keyboard shortcut:
Scroll Lock Scroll Lock R
• Press the Select Local-Remote button on the KVM RP front.