Garmin GNS 430 - Manual (Page 68)

60
To change a data field on the active flight plan page:
1. With the active flight plan page displayed, press m to display the active flight plan page
options window.
2a. Rotate the large right knob ( d ) to highlight “Change Fields?” and press E .
3. Rotate the large right knob ( d ) to highlight the field you wish to change.
4. Rotate the small right knob ( a ) to select the desired data item and press E .
5. Press the small right knob ( r ) to remove the cursor.
To restore factory default settings for data fields on the active flight plan page:
1. With the active flight plan page displayed, press m to display the active flight plan page
options window.
2b. Rotate the large right knob ( d ) to highlight “Restore Defaults?” and press E .
Active Flight Plan Options
The following options (some covered on the preceding pages) are available for the
fl ight plan catalog:
Activate Leg? activates/reactivates the flight plan and selects the highlighted leg as
the “active leg” (the leg which will currently be used for navigation guidance).
To activate a flight plan along a specific leg:
1. Press the small right knob ( r ) to activate the cursor and rotate the large right knob ( d ) to
highlight the desired destination waypoint.
2c. Select the “Activate Leg?” option from the active flight plan page options and press E .
3. A confirmation window will appear. With “Activate?” highlighted, press E .
Crossfill? allows you to transfer the active flight plan between two 400- or 500-series
Garmin units in a dual unit installation. See pages 58 and 142 for
additional information on this feature.
FLIGHT PLANS
Active Flight
Plan Options
4
o
c
q
o
a
190-00140-00.indd 60 5/7/2003, 5:16:57 PM