Garmin GNS 430 User Manual
Page 32
24
2. Press the small right knob (
r
) momentarily to place the cursor on the airport identifier field of
the first airport in the list. If you wish to select another airport, rotate the large right knob (
d
)
to highlight the desired airport.
3. The nearest airport page displays the common traffic advisory frequency (CTAF) for each
listed airport. To select this frequency, rotate the large right knob (
d
) to highlight the desired
airport’s CTAF frequency and press
E
to place the frequency in the standby field of the
COM window.
4. To display the entire list of frequencies for a nearby airport and select from that list, start with
the desired airport highlighted on the nearest airport page (as described in step 3 above), then
press
E
. Now press the small right knob (
r
) momentarily to remove the cursor and rotate
the small right knob (
a
) to display the frequency list. Press the small right knob (
r
) momen-
tarily to reactivate the cursor and rotate the large right knob (
d
) to highlight the desired
frequency. Press
E
to place the highlighted frequency in the standby COM window field.
To select a COM frequency for a nearby flight service station (FSS) or center
(ARTCC):
1. Select the nearest center or flight service page from the NRST page group. (See page 119, or
rotate the large right knob,
d
, until the NRST pages appear. Then, if necessary, rotate the
small right knob,
a
, to display the desired NRST page.)
2. Press the small right knob (
r
) momentarily to place the cursor on the page.
3. Rotate the large right knob (
d
) to highlight the FSS/ARTCC frequency and press
E
to
place the frequency in the standby field of the COM window.
From the nearest airport page, select the
desired airport to show a more detailed listing
of frequencies for that airport.
Use the nearest ARTCC page to quickly
retrieve the frequency(s) for the nearest center
(ARTCC) facility.
COM
Auto-Tuning FSS,
Center or Flight Plan
1
190-00140-00.indd 24
5/7/2003, 5:16:25 PM