Garmin GNS 430 - Manual (Page 102)

94
WPT PAGES
WPT Page Group
6
Section 6
WPT Pages
WPT Page Group
Section 2 introduced the GNS 430’s main page groups—NAV, WPT, AUX, NRST—
and described each page in the NAV group. This second page group (WPT) provides in-
formation for the thousands of airports, VORs, NDBs, intersections, runways, frequencies
and procedures stored on your Jeppesen NavData® card. A WPT page is also provided to
display information for up to 1,000 user-created waypoints.
To quickly select a WPT page:
1. From any page, press and hold c to select the default NAV page. (You may skip this step if
you are already viewing any of the main pages. See page 27.)
2. Rotate the large right knob ( d ) to select the WPT page group. “WPT” will appear in the lower
right corner of the screen.
3. Rotate the small right knob ( a ) to select the desired WPT page.
8 available
pages (see list
on pg. 119)
6 available
pages (see list
on pg. 27)
NAV NRST
4 available
pages (see list
on pg. 135)
AUX
10 available
pages (see list
below)
WPT
Airport Location Airport Runway Airport Frequency Airport Approach Airport Arrival Airport Departure
Intersection NDB VOR User Waypoint
Please note that your GNS 430 uses ICAO
identifiers for all airports. All U.S. airport
identifiers which contain only letters use
the prefix ‘K’. For example, Los Angeles
International is KLAX under the ICAO stan-
dard. Other airports, such as Otten Memorial
(3VS), that contain numbers in the identifier,
do not require the ‘K’ prefix. Many foreign
countries use two letter prefixes. For more
information on ICAO identifiers, contact:
Document Sales Unit
International Civil Aviation Organization
999 University Street,Montreal, Quebec
Canada H3C 5H7
190-00140-00.indd 94 5/7/2003, 5:17:32 PM