Garmin GNS 430 - Manual (Page 103)

95
The WPT page group includes ten pages. While viewing any WPT page, rotate the
small right knob ( a ) to select a different WPT page. The fi rst six pages provide detailed
information for the selected airport: location, runways, frequencies, approaches, arrivals,
and departures. The last four pages provide information for intersections, NDBs, VORs
and user-created waypoints.
After a WPT page is selected, information for a waypoint may be viewed by enter-
ing the identifi er (or name) of the desired waypoint. Airports, NDBs and VORs may be
selected by identifi er, facility name or location (city).
To enter a waypoint identifier:
1. Select the desired WPT page and press the small right knob ( r ) to activate the cursor.
2. Rotate the small right knob ( a ) to select the first character of the waypoint’s identifier.
3. Rotate the large right knob ( d ) to select the next character field.
4a. Rotate the small right knob ( a ) to select the desired character.
5. Repeat steps 3 and 4 until the identifier is selected, then press E .
6a. To remove the flashing cursor, press the small right knob ( r ).
To enter a waypoint facility name or city location:
1. Select the airport location page, NDB page or VOR page from the WPT page group. (See page
94.)
2. Press the small right knob ( r ) to activate the cursor.
3. Rotate the large right knob ( d ) to select the facility name or location (city) field.
4b. Rotate the small right knob ( a ) to select the desired character.
5. Rotate the large right knob ( d ) to select the next character field.
6b. Repeat steps 4 and 5 until the facility name or location is selected, then press E .
7. To remove the flashing cursor, press the small right knob ( r ).
6
WPT PAGES
Waypoint Identifier,
Facility, Location
s
b
s
b
q
b
190-00140-00.indd 95 5/7/2003, 5:17:34 PM